Xone K2 Traktor Mapping Xone

For those who have been reading Traktor Tips for a while now, you’re likely to remember a mapping that was provided by one of our Friday Guest Mix DJ’s DJ Animine. Well Animine is back with a new and improved mapping for the Allen and Heath K2. This time it is set up to control 4 decks, but with the intention of using two K2’s together. So those lucky enough to own Xone K2’s this is for you! The first K2 is set up to control deck A and C, whilst the second is set up to control decks B and D. Check out what Animine has to say: Notes from Animine – Xone K2 mapping It’s been a while since I shared my for a single Allen & Heath Xone K2 controller. In the meantime I have worked out a 4 deck mapping to be used with two A&H Xone K2 controllers.

My setup consists of these 2 controllers, plus a Native Instruments, an A&H and a NI which is run in step sequencer mode. Huawei p6 u06 firmware. This setup allows me to run 4 decks simultaneously in Traktor and at the same time have Maschine act as a drum machine on one of the AUX channels on the Xone mixer.

I won’t go into too much details of the setup, unless somebody wants a full description on how to setup and use it? ( use the comments below) Again it was my goal to keep the mapping simple, so no layers used in this mapping as with 2 controllers in use, you already have enough buttons to keep track of when you’re playing.

What I’ve basically done is divide each controller into 2 halves, controller 1 ( left) is for decks A & C, whilst the other controller ( right) serves decks B & D. Tip: connect the first controller via USB cable, but connect the second controller via the X:Link cable, it saves a USB port on your laptop. Each controller is divided into 2 sections by drawing a straight line down the middle, dividing the decks as described above.

Xone:K2 – Application Example: Single Setup – External Mixer. You can use your K2 to route the output from 2 separate virtual decks, into 2 channels of an external mixer. This means you can use your K2 to control your chosen DJ software and also use the features of an external mixer.

The left controller is connected on MIDI channel 14 and the right controller on channel 15. If you want to check out the details of the TSI file, I would advise you to use either the, or use the ( Mac only). Both these tools allow you to view or edit the mapping file full screen mode instead of using the tiny Controller Editor window within Traktor.

Keunggulan Program ini yaitu salah satunya bisa support Adobe Premiere pro 1.5. Untuk menginstal program ini, disarankan instal dahulu Adobe Premiere pro 1.5. Kemudian baru instal program Canopus ProCoder 3.6 0.24320. Canopus procoder 5 with crack download full. Hollywood Fx 5 Free Download For Adobe Premiere 6. Adobe PhotoShop CS6 Extended Full Version Free Dow. Xara 3d Maker 7 Full Version With Crack Free Downl. Canopus Procoder 2.0 Full Version Free Download; Hollywood Fx 4.6 Full Version Free Download 2015 (27) October (14) September (13).

This is a mapping for basic 4-deck control of Traktor with the Allen & Heath Xone:K2. It handles internal mixing (line faders & EQs), FX Unit assign, basic transport, & hotcues (1-4) for each deck. The line faders, EQs, FX unit assign,channel monitor, & Gain work for decks setup as either track or sample decks. The transport (layer 2 -Amber) & hotcues (layer 3 - green) are relevant only for track decks Everything is divided along vertical strips.one for each Deck C,A,B,D order.

Top encoders are for gain.push for channel monitor. Rotary pots and their buttons for EQs and EQ Kills, Line faders are self explanatory. I have only the bottom set of buttons set to use layers Layer 1: turn on FX units 1-4 for each deck Layer 2: Play, Cue, Sync, load selected track to deck Layer 3: Hotcues 1-4 for each deck bottom encoders: left encoder scrolls through track list, push button loads and plays track in preview player, right encoder seeks through track playing in the preview player Button on bottom right is SHIFT.